Syncing your transmitter involves multiple critical phases:

## Phase 1: Prepare Equipment

– Key fob for configuration

– Car documentation [1][8]

– Secondary key (if available) [1][9]

## Step 2: Enter Vehicle

Confirm all access panels are closed [2][8]

Sit in driver’s seat [2][9]

## Ignition Process: Position Key within Ignition https://keyfobprog.com/

Twist key to accessory mode without starting engine [1][5]

Hold for control indicators to activate [3][9]

## Initiate Programming: Activate Control

Locate closure switch on fob

Depress continuously for multiple counts [1][3]

Monitor acknowledgement tone [3][10]

## Cycle Ignition: Repeat Process

Turn key to ‘Off’ position [1][5]

Perform multiple repetitions as needed [9][10]

## Issue Resolution

Typical challenges include:

– Dead battery: Install new cell [4][6]

– Frequency conflict: Move away from EM sources [4][7]

– Configuration issue: Repeat process [5][11]

Locksmith devices like Autel KM100 can simplify advanced situations [6][7]